Battery Change - La Crosse Technology Weather Station Instruction Manual

The temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries,
please follow the steps below:
1.
2.
3.
Note:
In the event of changing batteries in any of the units, all units need to be reset by
following the setting up procedures. This is because a security code is assigned by the
transmitter at start-up and this code must be received and stored by the Weather
station in the first 3 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units
(Battery life see "Specifications").
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
Remove the battery compartment cover at the back of the transmitter.
Insert the batteries, observing the correct polarity (see marking).
Replace the battery compartment cover on the unit.
6