Care And Maintenance - La Crosse Technology Weather Station Instruction Manual

To wall mount:
1.
2.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired locations to
check that the outdoor temperature reading is receivable. In event that the signal is not
received, relocate the transmitter or move the units slightly as this may help the signal
reception.

CARE AND MAINTENANCE:


Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and
give inaccurate forecasts and readings.

Precautions shall be taken when handling the batteries. Injuries, burns, or property damage may be resulted if
the batteries are in contact with conducting materials, heat, corrosive materials or explosives. The batteries
shall be taken out from the unit before the product is to be stored for a long period of time.

Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries
of the recommended type.
Secure the bracket onto a desired wall using the screws and plastic anchors.
Clip the remote temperature sensor onto the bracket.
20