Drum Refresh; Drumcontrol; Eco Fuser - Kyocera FS-1116MFP Operation Manual

[Menu]
or
1. Common Setup
[OK]
or
17. Drum Reset
[OK]
[Menu]
or
1. Common Setup
[OK]
or
18. DrumRefresh
[OK]
[Menu]
or
1. Common Setup
[OK]
or

19. DrumControl

[OK]
OPERATION GUIDE
1
Access 17. Drum Reset.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
screen.

Drum Refresh

The drum refresh is cleaning the drum surface. If potential printing quality problems
has occurred, perform the drum refresh. Refer to General Guidelines on page 10-1.
1
Access 18. DrumRefresh.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
screen.
Drum Control
The drum control is cleaning the drum surface automatically when the machine is
turned on. You can adjust the cleaning time from 0, 90, 155 seconds.
1
Access 19. DrumControl.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
the ready screen.

Eco Fuser

When this mode is selected On, the fuser heater is switched off during sleep mode
to save power consumption. However, warm-up time becomes longer than Off.
to select On and press [OK]. The display returns to the ready
to select On or Off. Press [OK]. The display returns to the ready
to select the cleaning time. Press [OK]. The display returns to
System Settings
8-3