Table of Contents
Advertisement
Recalling Settings
Press the one of the Program 1 to 4 keys where the settings you want to recall are registered. The current
settings of various functions are replaced with the registered settings.
ID Card Copy
The procedure for using ID Card copying is explained below.
Recalled.
z Program 1
OPERATION GUIDE
1
Press the Copy key when the Copy key/indicator
is off.
NOTE:
If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2
Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-42.
3
Press the Program 1.
The ID Card Copy function is recalled.
4
Press the Start key. Scanning begins.
5
Turn over the original on the platen and press the
Start key.
6
After scanning all originals, press [End Scan] (the
Right Select key) to start copying.
Basic Operation
3
3-35
Advertisement
Table of Contents
