Table of Contents
Advertisement
Logout
Adding a User
This adds a new user. You can add Up to 21 users (including the default login user name). The table below
explains the user information to be registered.
Item
User Name*
Login User Name*
Login Password*
Access Level*
Account Name
E-mail Address
*
Mandatory at user registration.
NOTE:
By default, one of each default user with machine administrator rights and administrator privileges is
already stored. The following are the default user's properties.
User Name:
DeviceAdmin
Login User Name: 2800
Login Password:
2800
Access Level:
Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
OPERATION GUIDE
Enter the name displayed on the user list (up to 32 characters).
Enter the login user name to log in (up to 32 characters). The same login user
name cannot be registered.
Enter the password to log in (up to 64 characters).
Select Administrator or User for user access privileges.
Add an account where the user belongs. The user, who registered his/her
account name, can log in without entering the account ID. Refer to Job
Accounting on page 11-15.
The user can register his/her E-mail address. The registered address will be
automatically selected for subsequent operations that need any E-mail
function.
To log out the machine, press the Logout key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
•
When the Power key is pressed to enter the sleep
mode
•
When auto sleep is activated
•
When auto panel reset is activated
•
When auto low power mode is activated
Description
Management
11
11-5
Advertisement
Table of Contents
