Kyocera FS-C2126MFP Operation Manual page 33

Setting for Direct
transmission
Off
On
Memory Transmission (When originals are placed in the document processor)
After originals placed in the document processor are scanned and stored in the memory, the receiving system
is dialed. This method is very convenient because you can have originals returned to you without waiting for
sending of the originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After
originals placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been stored in memory. Every time one page is scanned, you perform an operation to allow
continued scanning, and after all the originals have been stored in memory, the receiving system is dialed.
Direct Transmission (When originals are placed in the document processor)
After the telephone line has connected with the receiving system, scanning of the originals placed in the
document processor starts. When multiple-page originals are placed, each page is scanned after the previous
one is sent.
Direct Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After the telephone
line has connected with the receiving system, the originals placed on the glass surface are scanned and sent.
NOTE:
When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been sent. Every time one page is scanned, you perform an operation to allow continued
scanning.
Starts memory transmission.
After originals are scanned into memory, the communication starts.
Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.
NOTE:
one destination for one transmission.
3-3
4 Press the or key to select [On].
5 Press the OK key.
Description
In direct transmission, you can designate only
FAX Operation (Basic)
3