Toner Install; Buzzer; Drum Reset - Kyocera FS-1016MFP Operation Manual

System Settings
[Menu]
or
1. Common Setup
[OK]
or
13. Sleep Mode
[OK]
[Menu]
or
1. Common Setup
[OK]
or

14. Toner Install

[OK]
[Menu]
or
1. Common Setup
[OK]
or

16. Buzzer

[OK]
8-2
1
Access 13. Sleep Mode.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
The display returns to the ready screen.
Toner Install
If you replace the toner container, you must reset the toner counter as explained
below.
1
Access 14. Toner Install.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
screen.
Buzzer
The Buzzer can be set to sound when a key on the operation panel is pressed or in
cases when errors occur, etc.
1
Access 16. Buzzer.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press or
screen.

Drum Reset

Perform the drum reset procedure when the drum unit has been replaced.
CAUTION:
If this procedure has not been performed, the machine cannot set the
proper main charger current control and a print quality problem may occur.
to select the time for the Sleep Mode to engage and press [OK].
to select On and press [OK]. The display returns to the ready
to select On or Off. Press [OK]. The display returns to the ready
OPERATION GUIDE