Epson EB-435W User Manual page 69

List of Functions
Sub-menu
Connection Set the connection mode when using EasyMP Network
Mode Projection to connect the projector and computer.
This is set to Quick by default.
See the following manual for details on Connection Mode.
EasyMP Network Projection Operation Guide
s
(This can only be set if Connection Mode is set to Quick.)
Channel
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
Wireless LAN Set the Wireless LAN Sys. to either 802.11b/g or 802.11b/g/n.
Sys.
The default value is 802.11b/g/n.
(This can only be set if Connection Mode is set to Quick.)
SSID Auto Set-
ting
Set to On to speed up the projector search.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.
(This can be set only if SSID Auto Setting is set to Off.)
SSID
Enter an SSID
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Function
g
. When an SSID is provided for the wireless LAN
Sub-menu
IP Settings (This can be set only if Connection Mode is set to Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
screen, set this to Off.
To prevent the IP address
IP Address Dis-
Standby screen, set this to Off.
play
Function
g
. If this
g
assigned to the
g
for the projector.
g
from being displayed on the LAN Standby
g
from being displayed on the LAN
69
g