WARNING
Electrical Shock Hazard
Disconnect from electrical and gas supplies
before servicing unit.
Failure to do so could result in death, elec-
trical shock, or explosion.
CAUTION: When you work on the cooktop, be
careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
REMOVING THE MAINTOP
Burner Screw (2)
Burner Base
Drip Pan
Control Knob
Bezel
1.
Turn off the gas supply and electrical
power to the cooktop.
2.
Remove the grates and burner caps.
Refer to Figure 4-1 for the following steps.
3.
Remove the knobs from the controls.
4.
Remove all of the burner bases. To re-
move a burner base, remove the two
screws, and lift it off the drip pan.
5.
Lift the maintop off the countertop. NOTE:
If you are replacing the maintop, unclip the
control bezels from the mounting holes,
otherwise leave them installed.
Maintop
Figure 4-1
4-2