Adjusting Basic Position Of Clutch Lever - KTM 690 DUKE EU 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting basic position of clutch lever

9.60
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
Danger
Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space without an effective
exhaust extraction system.
–
Start the engine and run it until the 5th bar of the temperature indicator lights up.
–
Stop the engine and allow it to cool down.
–
When the engine is cool, check the coolant level in the radiator and, if necessary, add
coolant.
–
Remove the cap of the compensating tank
up to the MAX mark.
–
Mount the cap of the compensating tank.
700181-11
and add coolant until the coolant level is

122