Description Of Controls - Hoover SIX.AAA WHISPER 1600 AAA 160 Instructions For Use Manual

05651106 22/11/00 8:30 pm Page 15
When you are completely satisfied with your menu selection, you may exit the
menu and testing of the installation may now commence.
If, after the initial installation you may want to change of any of the menu at a later
date, again run through the menu options from the beginning and change the
options you want to reset. This may be useful to change the "Set New Time" when
the clocks go forward or back.
Once set, the menu options will remain in the memory of the machine even if the
machine is unplugged or if a power cut occurs.
All of the buttons and dials on the washing machine control panel are listed below.
When you have selected the desired programme and any option buttons, the
information you have selected will appear on the screen in the Inter@ct display
panel.
When programmes and option buttons are compatible a bleeping sound will be
heard and the light above the option button selected remain illuminated. If you
select an option button that is not compatible with the programme you require
(e.g. if you choose a cottons wash programme and try to select "Fast Iron" button)
a buzzing sound will be heard and the button light will not illuminate. To select an
option button press it once; to deselect an option button, press it again.
Carefully read the relevant descriptions detailed below:
Programme Selector Dial
Note: Do not press the start/pause button before selecting
Door open button
the programme. If this does happen, cancel the programme
A special safety device prevents the door from being opened immediately
(that you have set accidentally) by pressing the start/pause
after the end of the cycle. Wait for 2 minutes after the wash cycle has
finished before opening the door. As a safety measure check that there is no
button for five seconds (See programme cancelled
water evident in the drum.
description).

DESCRIPTION OF CONTROLS

15