Connecting the Cold Water Supply Our customer service advisors will require this information whenever you contact Connecting the Drainage Pipe Hoover. Please keep all documentation in a safe place for future reference or for any Levelling the Machine future owners.
Customer Service Caring for the environment At Hoover, we aim to make appliances that are reliable and long lasting. However, Together, we share the responsibility to safeguard our environment for future should your appliance need to be serviced during its working life, no one is more generations.
All packaging materials used are environmentally friendly and recyclable. Please help Contact an authorised serviceman and ask them to use official Hoover spare parts. dispose of the packaging via environmentally friendly means. Your local council will be able to give you details of current means of disposal.
Installation Water Supply Before installing the machine, ensure that the mains plug and water supply valves are This machine should only be connected to a cold-water supply. The cold-water easily accessible from your chosen machine location. pressure should be between 0.5 and 8 bar (0.05-0.8 Mpa). Make sure there is enough space for the machine.
Connecting the Cold Water Connecting the drainage pipe Supply This machine must be connected in accordance with the water supply regulations. Water bylaws prohibit connection to a surface water drain. Only one hose is required to install this machine to a cold water supply. Cold fill is an Decide which plumbing option suits you best then follow the instructions below: energy efficient system.
Step 5. Select the spin programme and press the Start Pause button to start the Levelling The Machine machine. If the machine takes longer than one minute to empty check the drain hose for kinks. Your machine is heavy so care must be taken when moving it. We recommend that two people move the machine to avoid strain and possible injury.
Description of the Machine The Control Panel The Hoover washing machine details are indicated below: Start/Pause Temperature Button Delay Start On/Off Button Button Button Display Detergent Control Dispenser Panel Door Handle Porthole Sensitive Night Stain Wash Time Programme & Day...
Door Locked indicator Spin Speed The Door Locked indicator light is illuminated when the door is fully closed and the machine When a programme is selected the maximum spin speed allowed for that programme is ON. appears on the display. Pressing the Spin Speed button will reduce the speed by When Start Pause is pressed on the machine with the door closed the indicator will flash 100rpm each time the button is pressed.
Sensitive Care Wash Options The Sensitive Care option washes your clothes in a deeper than normal water level to provide gentler washing for especially delicate fabrics, while detergent is removed The following options should be chosen once the required programme has been thoroughly with five extra rinses.
Spin Speed Automatic Features The spin cycle is used to remove as much water as possible from the laundry without damaging your clothes. The recommended spin speed for each programme is already KG Mode (Half Load) set to the highest level for that chosen programme. By pressing the Spin Speed button Available on the Cottons and Synthetics cycles, the intelligent sensor adjusts the water you can reduce the spin speed in 100rpm intervals.
Rinse Programme Descriptions This programme carries out three rinses with an intermediate spin (which can be For handling the various types of fabric and their level of dirtiness in your laundry the reduced or excluded by using the Spin Speed option). It can be used for rinsing any washing machine has different programme groups according to type of wash, type of fabric e.g.
Programme Guide Programme Fabric Type Water Water Spin Length of Programme (1) Detergent Temp Temp Speed Load Short Med. Long Recommended Size (C°) (C°) (RPM) (kg) Cottons, Non- Only with the 1400 2:01 2:36 3:56 Cottons fast Coloureds, prewash button mixed fabrics selected Only with the...
Amount of laundry Refer to the programme guide (pag.24) It is possible to reduce the amount of detergent when washing only a small amount of laundry. ** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and For smaller loads use less detergent. No 1061/2010 COTTON PROGRAMME with a temperature of 60°C The dosages shown on the packaging of detergents for washing delicates often already...
Recommendations Running a Wash Cycle Always follow the wash care labelling on the garments. Fasten zips, tie strings and close press-studs to prevent tangling. Ensure that pockets This section summarises the main points when completing a wash cycle. For detailed are emptied of loose change and other small items.
the wash cycle, the KG Mode will weigh the clothes and update the wash time. Care and Maintenance In some programs in the initial phase of the cycle there are planned spin sequences to ensure optimal wash results. The washing machine needs very little maintenance, but regular attention to a few small details will ensure the continued performance of your washing machine.
We recommend that the filter be cleaned frequently, at least once a month. installed incorrectly or used incorrectly. If the problem persists after completing the recommended checks, please call Hoover Service (tel: 08705 400 600); they may be Maintenance wash able to assist you over the telephone.
Is the load unbalanced? Stop the programme, redistribute the load and restart. If the following error codes are displayed, switch OFF the machine and contact Hoover Service: 0, 1, 4, 5, 7 and 8.
At Hoover, we aim to make appliances that are reliable and long lasting. However, During a power failure the water can be drained and the load can be removed from...
Page 20
A number of accessories can also be purchased using the above contact details. Brochures At Hoover, we produce a range of home appliances including vacuum cleaners, cooling appliances, washing machines, tumble dryers, dishwashers, cookers and built-in appliances. If you would like a brochure for any of our product ranges please call our head office...
Page 21
® Note: Hoover policy is one of continuous development and accordingly we reserve the right to alter specification without notice. The manufacturer declines all responsibility for errors printed in this instruction manual. Hoover Ltd. Pentrebach, Merthyr Tydfil, Mid Glamorgan, CF48 4TU...