Lexus LS600L Dismantling Manual page 23

6. Remove the service plug grip.
(1) Pull the edge of the battery service
hole cover outward.
(2) Slide the cover to the left to remove
it.
Caution:
Wear insulated gloves for the
following 4 steps.
(3) Slide the handle of the service plug
grip to the left.
(4) Raise the service plug grip as shown in the illustration below.
(5) Remove the service plug grip.
(6) Apply insulating tape to the socket of the service plug grip to insulate it.
7. Remove the cowl top ventilator louver.
(1) Remove the 4 clips and hood to cowl top seal.
(2) Remove the 6 clips and cowl top ventilator louver.
For LHD
Service Plug Grip
HV battery
Battery Service Hole Cover
For RHD
19