Dismantling A Vehicle - Lexus LS600L Dismantling Manual

Dismantling a vehicle

The following 2 pages contain general instructions for use when working on an
LS600h/LS600hL. Read these instructions before proceeding to the HV battery removal
instructions on page 18.
WARNING:
・ The high voltage system may remain powered for up to 10
minutes after the vehicle is shut off or disabled. To prevent
serious injury or death from severe burns or electric shock, avoid
touching, cutting, or opening any orange high voltage power
cable or any high voltage component.
1. Shut off the ignition (READY indicator
is off). Then disconnect the cable from
the auxiliary battery negative (-)
terminal.
2. Remove the service plug grip.
(1) Pull the edge of the battery service hole cover outward.
(2) Slide the cover to the left to remove it.
Caution:
Wear insulated gloves for the following 4 steps.
(3) Slide the handle of the service plug grip to the left.
(4) Raise the service plug girp.
(5) Remove the service plug grip.
(6) Apply insulating tape to the socket of the service plug grip to insulate it.
Battery Service Hole Cover
15