Table of Contents
Advertisement
840141302 v03.qxd:840141301 Blender
■ To protect against risk of electrical shock, do not put cord,
plug, base, or motor in water or other liquid.
■ Unplug blender from electrical outlet.
■ Wipe blender base, control panel, and cord with a damp
cloth or sponge. To remove stubborn spots, use a mild,
non-abrasive cleanser.
■ To clean jar, unscrew Sure Rest
cutting blades.
■ Do not try to separate the gasket from the cutting blades.
■ Carefully wash cutting blades, Sure Rest
plastic), lid, and filler cap in hot, soapy water. Rinse and dry
thoroughly. Do not soak. Glass jars may be washed in an
automatic dishwasher. If desired, all parts except the cutting
blades may be washed in the dishwasher in the top rack
only. Please note: some part distortion may occur if your
household dishwasher temperature is higher than normal or
if parts are placed too close to the heating element.
NOTE: Do not wash cutting blades in a dishwasher.
■ To reassemble blender, first screw cutting blades into jar;
then place jar onto Sure Rest
■ Store blender with lid ajar to prevent container odor.
QUICK CLEAN
The Quick Clean function should only be used to rinse the
blender between batches of processing the same food.
When the processing of a single type of food is finished, the
blender should be disassembled and thoroughly cleaned as
instructed in "How to Clean."
To Quick Clean, pour 2 cups (500 ml) warm water in jar and
add 1 drop liquid dishwashing detergent. Run the blender on
HIGH SPEED for 10 seconds. Discard soapy water. Rinse with
clean water.
This function is not a substitute for regular cleaning as instruct-
ed in "How to Clean." This function should never be used
when blending any mixture containing eggs, milk, or any
other dairy products, meats, or seafood.
10/8/08
HOW TO CLEAN
™
jar base and remove
™
jar base.
10
11:29 AM
Page 10
™
jar base, jar (if
Advertisement
Table of Contents
