How To Clean; Quick Clean - Hamilton Beach 52300 Owner's Manual

840141300 Blender 12/20/05

HOW TO CLEAN

I Unplug blender from electrical outlet.
I Wipe blender base, control panel, and cord with a
damp cloth or sponge. To remove stubborn spots, use
a mild, non-abrasive cleanser.
I To clean jar, unscrew Sure Rest
cutting assembly.
I Carefully remove blades and gasket from bottom of
™
Sure Rest
I Carefully wash cutting blades, Sure Rest
(if plastic), and cover in hot, soapy water. Rinse and
dry thoroughly. Do not soak. Glass jars may be
washed in an automatic dishwasher. If desired, all
parts except the cutting assembly may be washed in
the dishwasher in the top rack only.
Please note: some part distortion may occur if your
household dishwasher temperature is higher than nor-
mal or if parts are placed too close to the heating ele-
ment.
NOTE: Do not wash cutting blades in a dishwasher.
I Reassemble cutting blades. Replace jar onto blender
base.
I Store blender with lid ajar to prevent container odor.

QUICK CLEAN

The Quick Clean function should only be used to rinse
the blender between batches of processing the same
food. When the processing of a single type of food is
finished, the blender should be disassembled and
thoroughly cleaned as instructed in "How to Clean."
To Quick Clean, pour 2 cups (500 ml) warm water in jar
and add 1 drop liquid dishwashing detergent. Run the
blender on HIGH SPEED for 10 seconds. Discard soapy
water. Rinse with clean water.
This function is not a substitute for regular cleaning as
instructed in "How to Clean." This function should never
be used when blending any mixture containing eggs,
milk, or any other dairy products, meats, or seafood.
11:23 AM Page 10
jar base.
10
™ jar base and remove
™ jar base, jar