PART , TOOLS,MATERIAL
YOU WILL NEED THE FOLLOWING
TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material
for covering
the counter top.
Clear Tape
(for taping
the templates
to the wall)
Stud Finder
or Thin Nail
Saber Saw (for cutting
vent holes for roof
or wail vending)
_lf_-"-
Phillips Screwdriver
(for the screws)
Pencil
Flat Blade Screwdriver
(for the bolts)
Keyhole Saw (for the power cord hole)
Electric drill
3/8" and 3/4" wood drill bits
1/2"
and 3/1 6"
drill bits
Plumb Line
Measuring
Tape (metal
preferred)
Duct Tape
Small Side Cutters or Tin Snips
Caulking
gun
Gloves
• If you have brick or masonry wails, you need special hardware and tools.
• The ductwork you need for the installation is not included. Ail wail and roof caps must have a back=
draft damper.
6