Make sure that the battery is NP-FW50.
When you charge a battery pack that has not been used for a long time, the charge lamp on
the product may flash in rare cases. If this happens, remove the battery pack and re-insert it.
[252] Troubleshooting > Battery pack and power
The battery pack has not been charged even if the charge
lamp on the product has turned off.
This phenomenon occurs when you charge the battery pack in an extremely hot or cold
location. The optimum temperature for charging the battery pack is between 10 °C and 30 °C
(50 °F and 86 °F).
[253] Troubleshooting > Battery pack and power
The battery pack is not charged.
When the battery pack is not charged (the charge lamp does not light) even if you follow the
proper charging procedure, remove the battery pack and re-insert the same battery pack
securely, or disconnect and reconnect the USB cable.
[254] Troubleshooting > Shooting still images/movies
You cannot record images.
You are using a memory card with a write-protect switch, and the switch is set to the LOCK
position. Set the switch to the record position.
Check the free capacity of the memory card.
You cannot record images while charging the flash.
The lens is not attached properly. Attach the lens properly.