Bracket - Sony ILCE-7 How To Use Manual

Self-timer(Cont):
Shoots images continuously after 10 seconds.
Cont. Bracket:
Shoots images while holding the shutter button down, each with different degrees of brightness.
Single Bracket:
Shoots a specified number of images, one by one, each with a different degree of brightness.
WB bracket:
Shoots a total of three images, each with a different degree of brightness according to the
selected settings for white balance, color temperature and color filter.
DRO Bracket:
Shoots a total of three images, each at a different degree of D-Range Optimizer.
[80] Using shooting functions > Selecting a drive mode
(Continuous shooting/Self-timer)
Cont. Shooting
Shoots images continuously while you press and hold down the shutter button.
1. MENU→
Hint
To hold the focus and exposure during burst, change the following settings.
The exposure of the first shot is determined when you press the shutter button halfway
down. The exposure setting for the first shot is used for the subsequent shots.
Set [Focus Mode] to [Continuous AF].
Set [ AEL w/ shutter] to [Off] or [Auto].
[81] Using shooting functions > Selecting a drive mode
(Continuous shooting/Self-timer)
Spd Priority Cont.
The product continues to shoot as long as the shutter button is pressed. You can continuously
shoot at a rate faster than that of [Cont. Shooting].
(Camera Settings) → [Drive Mode] → [Cont. Shooting].