2. When the product is ready for the connection, an information screen appears on the
product. Connect the smartphone and the product using that information.
Connection setting methods differ among smartphones.
3. Check the composition of the image on the smartphone screen, and then press the shutter
button (A) on the smartphone to shoot an image.
Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].
Note
This product shares the connection information for [Smart Remote Embedded] with a device
that has permission to connect. If you want to change the device that is permitted to connect
to the product, reset the connection information by following these steps. MENU →
(Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register
the smartphone again.
[198] Using Wi-Fi functions > Controlling this product using
a Smartphone
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect this product and an NFC-enabled Android smartphone with one touch, without
performing a complex setup operation.