Accessories; Technical Data - Hilti UD16 Operating Instructions Manual

Never operate other power tools or appliances from the generator or transformer at the same time. Switching
other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in
damage to the power tool.

3. Accessories

The list of insert tools can be found in Section 2 under "Possible applications".
Keyless chuck
Key chuck
Chuck key (with keyed chuck)

4. Technical data

Right of technical changes reserved.
Rated
100 V
voltage
Rated power 710 W
input, UD 16
Rated cur- 7.5 A
rent input,
UD 16
Rated power 650 W
input, UD 30
Rated cur- 6.9 A
rent input,
UD 30
Power tool
Mains frequency
Weight of tool without side handle
Weight in accordance with EPTA
procedure 01/2003
Dimensions (L x W x H)
Speed in 1st gear under no load
Speed in 2nd gear under no load
Chuck Ø
Maximum torque, 1st gear
Maximum torque, 2nd gear
Speed control
Forward / reverse
Tightening torque for changing
chuck
110 V 120 V
710 W
6.9 A 8 A
650 W
6.5 A 6.5 A
UD 16
50...60 Hz
2.4 kg
2.6 kg
342 mm x 86 mm x 205 mm
900 r.p.m.
2,500 r.p.m.
1.5...13 mm
80 Nm
29 Nm
Electronic, by way of the control
switch
Switching lever with interlock to
prevent switching while running
120 Nm
220 V 230 V
710 W 710 W
3.5 A 3.1 A
650 W 650 W
3.1 A 2.9 A
UD 30
50...60 Hz
2.3 kg
2.5 kg
337 mm x 86 mm x 205 mm
1,200 r.p.m.
3,300 r.p.m.
1.5...13 mm
51 Nm
18.5 Nm
Electronic, by way of the control
switch
Switching lever with interlock to
prevent switching while running
120 Nm
en
240 V
710 W
3.1 A
650 W
2.9 A
21