Description - Hilti UD16 Operating Instructions Manual

Obligation signs
Wear a hard Wear eye
hat protection
en
Wear
protective
gloves
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Amps Hertz
Alternating Double
current insulated

2. Description

2.1 Use of the product as directed
The power tool is a hand‐held, mains‐powered electric drill for drilling in wood and metal and for screwdriving.
Under certain conditions, the power tool is also suitable for mixing (see "Applications").
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction, where the types of work listed above may be carried out.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Modification of the power tool or tampering with its parts is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
18
Location of identification data on the power tool
The type designation, item number, year of man-
ufacture and technical status can be found on the
type identification plate on the machine or tool. The
serial no. can be found on the underside of the motor
Wear Wear ear
housing. Make a note of this data in your operating
breathing protection
instructions and always refer to it when making an
protection
enquiry to your Hilti representative or service depart-
ment.
Type:
Serial no.:
1 2
Drilling, 1st Drilling, 2nd
gear gear
Volts Watts