Safety Rules - Hilti UD16 Operating Instructions Manual

Noise and vibration information (measured in accordance with EN 60745 ):
Typical A‐weighted sound power level
Typical A‐weighted emission sound pressure level
Uncertainty for the given sound level
Triaxial vibration values (vibration vector sum)
Screwdriving without impact action, a
en
Uncertainty (K)
Additional information about the UD 16
Triaxial vibration values (vibration vector sum)
Drilling in metal, (a )
h, D
Uncertainty (K)
Additional information about the UD 30
Triaxial vibration values (vibration vector sum)
Drilling in metal, (a )
h, D
Uncertainty (K)
Information about the power tool and its applications
Protection class

5. Safety rules

5.1 General power tool safety warnings
WARNING! Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains‐
operated (corded) power tool or battery‐operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
22
97 dB (A)
86 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑2
< 2.5 m/s²
h
1.5 m/s²
Measured in accordance with EN 60745‑2‑1
< 2.5 m/s²
1.5 m/s²
Measured in accordance with EN 60745‑2‑1
3.5 m/s²
1.5 m/s²
Protection class II (double insulated)
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
5.1.3 Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.