Basic Operation; Switching The Projector On/Off; Power Cord - Panasonic PT-AE4000U Functional Instructions

Basic Operation

Switching the projector on/off

Power cord

Connecting
J
1. Make sure the shape of the power plug and the
AC IN terminal on the back of the projector match,
then push the plug all the way in.
2. Align the side of the
the side guide rail of the AC IN terminal of the
projector and slide it in.
3. Place the latch to the latch catcher and press until
it clicks.
Latch
4. Connect the power cord to a wall outlet.
NOTE:
• Do not use other than the provided power cord.
• Ensure all the input devices are connected and turned off before connecting the power cord.
• Do not force the connector as this may damage the projector and/or the power cord.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
power cord secure lock with
Rail guide
Switching the projector on/off
Disconnecting
J
1. Unplug the power cord from the wall outlet.
2. Depress the latch and slide the cover off.
Latch
3. Slide the power cord secure lock up along the side
guide rail.
4. Hold the plug and unplug it from the
terminal on the back of the projector.
Rail guide
AC IN
E
NGLISH - 9