Color Management - Panasonic PT-AE4000U Functional Instructions

J COLOR MANAGEMENT
You can adjust a selected color individually by
using CURSOR or adjust the six color components
(Red, Green, Blue, Cyan, Magenta, Yellow) by
using RGBCMY.
To open the COLOR MANAGEMENT menu,
select from the ADVANCED MENU in the
PICTURE menu, or press the FUNCTION button
as a shortcut.
In the factory default setting, COLOR MANAGEMENT
is set as a default for the FUNCTION button.

COLOR MANAGEMENT

PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
PROFILE SAVE
SELECT
PROFILE DELETE
PROFILE NAME CHANGE
RETURN
Create a new profile
Q
Adjusting the selected color with the
CURSOR mode.
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1. Press ◄ ► to select CURSOR in ADJUSTMENT
MODE.
2. Press ▲ ▼ to select START ADJUSTMENT and
press the ENTER button.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed.
Target cursor
3. Move the cursor with ▲ ▼ ◄ ► to the required
place to select a color and press the ENTER
button.
The color at the center of the target cursor is sampled
and the sample box is displayed in the left of the cursor.
The menu items are displayed on the screen.
You may fail to adjust when the very edge point of
the projection area is selected as sample.
You can create a profile only when ADJUSTMENT
MODE is set to either CURSOR or RGBCMY.
CURSOR
DEFAULT
ENTER
SELECT
RETURN
Sampled color
NORMAL
CURSOR
COLOR 0 - +
TINT 0 - +
BRIGHTNESS 0 - +
4. Press ▲ ▼ to select a menu item and the ◄ ► to
adjust each item level.
The result box is displayed on the right of the cursor
and shows the adjusted color.
CURSOR
DEFAULT
COLOR
ENTER
SELECT
TINT
BRIGHTNESS
RETURN
Adjust the vividness of the color.
COLOR
Setting range: −30 to +30
Adjust the color tone.
TINT
Setting range: −30 to +30
Adjust the brightness of the color.
BRIGHTNESS
Setting range: −20 to +20
5. Press the ENTER button to store the adjusted
result.
" PROCESSING" is displayed for a few seconds and
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
6. Press the MENU or RETURN button to return to
the previous menu.
Repeat the steps above to store more adjustment.
When the LOG is fully stored, the screen will
be switched automatically to the COLOR
MANAGEMENT menu.
Adjusting the selected color with the
RGBCMY mode.
Select the color from 6 different color types (RED,
GREEN, BLUE, CYAN, MAGENTA, YELLOW)
and adjust COLOR, TINT and BRIGHTNESS.
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
1. Press ◄ ► to select
MODE.
2. Press ▲ ▼ to select START ADJUSTMENT and
press the ENTER button.
PICTURE menu
-
+10 +
-
+10 +
+10 - +
Adjusted color
NORMAL
RGBCMY
RGBCMY in ADJUSTMENT
E
NGLISH - 27