Enable Snmp Service; Enable Terminal Services - Synology DiskStation User Manual

Enable SNMP Service

Go to Main Menu > Control Panel
Synology DiskStation network flow with the network management software.
Currently, SNMPv1 and
To enable SNMP service:
1 Tick Enable SNMP service
2 Enter the optional information to help you identify your Synology DiskStation: Name, Location, and Email.
3 Click OK.
To disable the SNMP service:
Uncheck Enable SNMP

Enable Terminal Services

Go to Main Menu > Control Panel
log in to Synology DiskStation and modify its settings.
To enable connection to Synology DiskStation via Telnet or SSH:
1 Do any of the following:
 If you want to enable the Telnet service, tick
 If you want to enable the SSH service, tick
Note: When you disable the SSH service, all SSH tasks will be terminated immediately. If you disable the SSH
service while performing a backup task, perform the task again after the SSH service is disabled.
2 Click OK.
172 Chapter 16: Perform Advanced Management Tasks
> SNMP to enable SNMP service, which allows users to monitor
SNMPv2c protocols are supported.
and enter a Community
service, and click OK.
> Terminal to enable Terminal service, allowing you to use Telnet or SSH to
Enable SSH
Synology DiskStation User's Guide
name.
Enable Telnet service.
service.
Based on DSM 3.0