Synology DiskStation User Manual page 50

Go to Main Menu > Control Panel
Note: To configure port forwarding rules and assign static IP address, you must have the administrative permission
to the router.
Set up Router
Before adding port forwarding rules, you need to set up your router first.
To set up your router:
1 Click Set up router to open the settings window.
2 Select your router by doing the following :
a Choose your router from the
b If you cannot find your router, click
c If you still have trouble finding your router even after the list is updated, contact Synology.
3 Enter the protocol and port for your router. The protocol and port vary depending on the model of your router. If
you cannot connect using the default HTTP protocol and 80 port, refer to the documentation that comes with
your router for correct settings.
50 Chapter 5: Connect from the Internet
> Router Configuration to set up your router and port forwarding rules.
Router drop-down menu.
Update List to get the latest router support list from Synology.
Synology DiskStation User's Guide
Based on DSM 3.0