Advertisement
Available languages
Available languages
14. Connecting
the water to the
appliance
[_
When connecting
the water pipe to the solenoid
valve of the appliance,
follow the instructions
supplied
by the manufacturer
of the ice maker
installation
kit enclosed
with the installation
manual.
When bending the water pipe, do not kink it,
otherwise
there is a risk of leaks and water damage.
Use bending aids.
C3 Attach the cover strip to the attachment
plate (top).
Shorten the fitting strip to the required height!
13. Attaching
the individual
appliance
to the side of
the cavity
C3 Screw the attachment
plate tugs (side) to the
adjacent furniture/fixtures
(individual appliances
only).
C3
C3
C3
C3
C3
C3
Remove the cap from the appliance
connection
Li_.
Bend the water pipe according
to the location of the
connection
on the appliance
_.
Push the union nut and seal onto the water pipe.
Push the end of the water pipe into the appliance
connection
and screw on the union nut _3_.
Tighten hand tight.
Using the open ended wrench,
tighten the union
nut. Do not overturn!
Open the shut off valve and main water tap.
Check the connection
on the shut off valve and
on the appliance
for leaks.
21
Advertisement
Chapters
