Cabinet Opening - Whirlpool GU3200XTXB4 Installation Instructions Manual

Electrical
Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
--" Connect ground wire |
--_.
Remove the green grounding screw and place
through the ring terminal of the green ground wire.
Reattach and tighten the green screw.
NOTE: Twist on wire connector. Gently tug on wires to be
sure both are secured.
Connect wires black to black and white to white, using UL
Listed!CSA Approved twist-on wire connectors (included
with power supply cord kit).
Tighten strain relief screws to secure cord.
Place wires inside terminal box. Insert tabs
on left side of cover. Make sure wires are tucked inside
box. Close cover ensuring wires are not pinched. Use 1/4"
nut driver and previously removed screw to secure
cover.
NOTE: Do not plug into outlet until instructed to do so.
Determine Cabinet Opening
If needed, see website for animated representation of this 13
step. Visit www.whirlpool.com under FAQ tab.