Table of Contents
Advertisement
(B)
(A)
(D)
(C)
2. Insert the tongue plate (A) into the
open end of the buckle (C) until an
audible "click" is heard, indicating
the latch is locked. Make sure the
belt is not twisted.
S2BLB303A
3. Pull the tongue plate (B) and insert
the tongue plate into the open end
of the buckle (D) until an audible
"click" is heard, indicating the latch
is locked. Make sure the belt is not
twisted.
There will be an audible "click" when
the tab locks in the buckle. The seat
belt automatically adjusts to the prop-
er length only after the lap belt is
adjusted manually so that it fits snug-
(B)
ly around your hips, if you lean for-
ward in a slow, easy motion, the belt
will extend and let you move around.
If there is a sudden stop or impact,
the belt will lock into position. It will
(D)
S2BLC304
also lock if you try to lean forward too
quickly.
KNOWING YOUR VEHICLE
WARNING
When using the rear seat center
belt, you must lock all tongue
plates and buckles. If any
tongue plate or buckle is not
locked, it will increase the
chance of injury in the event of
collision.
3-33
Hide quick links:
Advertisement
Table of Contents
