DRT
MODE
/SET
DRT ALTI
Electric Azimuth Compass
It displays azimuth according to the
vehicle's driving direction.
The indication is displayed only when
the vehicle is in motion.
✽ ✽ NOTICE
If new vehicle is first driven or if the
battery has been disconnected, cor-
rect the azimuth indicator before
driving.
Correcting Azimuth Indicator
Position correction should be per-
formed if the displayed direction of
the vehicle differs from the actual
direction of the vehicle, or if the bat-
tery has been disconnected.
DOWN
UP
E
BARO
hpa
m
ft
S2BLA431
DRIVING YOUR VEHICLE
1. Start the vehicle and access the
compass function indicated by
DRT on the display.
MODE/SET button until the DRT
display begins to blink on and off.
2. Slowly (about 3 mph) and carefully
drive the vehicle in a complete 360
degree circle, within 128 seconds
(about two minutes).
3. After completing the circle drive,
the DRT display will stop blinking
and the error correction will be
complete.
Press the
4-53