4. Remove the bulbs by pulling them
straight out.
5. Install new bulbs in the socket.
6. Install the trim securely with the
fasteners.
S2BLA744A
License Plate Light
1. Loosen the lens retaining screws
with a cross-tip screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it
straight out.
4. Install a new bulb.
5. Reinstall the lens securely with the
lens retaining screws.
z
x Stop/Tail light
y Turn signal light
z Back up light
{ Side marker light
S2BLA745
Rear Combination Light Bulb
Replacement
1. Open the rear hatch.
MAINTENANCE
x
y
{
S2BLA746A
7-39