Table of Contents
Advertisement
DRIVING YOUR VEHICLE
LO W
Full-Time 4WD Operation
(If equipped)
When 4WD is selected with the trans-
fer shift knob, the vehicle will switch
to 4WD operation after a few sec-
onds.
4-22
✽ ✽ NOTICE
When the vehicle shifts into 4WD
mode, a slight mechanical sound
and vibration may be felt and does
not indicate a problem with the sys-
tem.
To avoid shift shock, when the vehicle
is stopped and you make a transfer
S2BLA411B
case shift using the transfer shift
knob, wait until the corresponding
indicator light in the instrument clus-
ter illuminates before driving.
Knob position
This is used to set different positions.
AUTO
Full power delivered to front and rear
axle for increased traction. Use this
mode for normal on-road driving.
The 4WD LOW indicator light (
will be turned off after blinking for a
few seconds to remind you that you
are in the AUTO mode.
LOW
Full power to both axles, including a
lower gear ratio for low speed appli-
cations that require extra power such
as wet pavement, snow-covered
roads and/or off-road.
LOW Mode is not recommended on
dry pavement.
The 4WD LOW indicator light (
will be turned on after blinking for a
few seconds to remind you that you
are in the LOW mode.
4WD
)
LOW
)
4WD
LOW
Hide quick links:
Advertisement
Table of Contents
