Installation And Adjustment - Haier HWM6815 User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
Push the lint filter
downward to location
for lint filter.
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Install the bottom plate
After you open the package, please lean the
washing machine gently down on soft items
( like the towel cloth, blanket, etc. ). Install the
bottom plate to the bottom of the machine with
the five screws by a cross screwdriver, then
lift the machine up gently. See to the figure:
Back
Front
Soft items
Loosen
High
4
Bottom plate
Screw
adjustable nut
Fasten
adjustable foot
Low