CONTENTS Names of the parts Safety precautions Installation and adjustment Install the water inlet hose Preparation before using in the laundries Usage of the detergent Use the operation buttons Close the top lid Finish washing Disposal after washing Trouble shooting Answer to question Packing list specifcation...
Packing list × ° Ï ä Ë µ Ã ÷ Name User's manual Component of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet The end connecting to the water inlet hose jointer Bottom cover (Inside the inner tub of washing machine)
Safety precautions The washing machine must be positioned Please plug the power plug on special so that the plug is accessible. Be sure to pull the receptacle. Be sure to use three-pins plug off and close the water faucet in power receptacle.
Page 5
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. Clean the detergent box and set it on It must be cleaned in time after each using.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc.
Page 7
Steps of using the operation buttons and description of the steps Spin Spin Reserve Reserve 1.Push "power" button to switch on the power 2.Push "program" button to select suitable full-auto program After the power is switched on, "normal"is automatically set. To select other full-auto program, please push the "program"...
Install the water inlet hose Confirm the water faucet Water faucet,suitable Outlet end surface It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider.
Page 9
4 Use the operation buttons Description of the function of buttons CHILD LOCK FUNCTION Indicator mode and meaning Flashing, indicating the running program On, indicating the program about to run or the selection mode "Start/pause" button After the power is switched on, press it to start the machine During working, push it to pause.
1 Preparation before washing Preparation before washing 1.Connect the water inlet hose 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose 4.slanting or uneven ground may result in unstable working or abnormal noise.