NETGEAR WGR614v8 Reference Manual page 20

54 Mbps Wireless Router WGR614v8 Reference Manual
1
Figure 1-1
You can use the status lights to verify connections.
Table 1-1. Status Light Descriptions
Label Activity
On
1. Power
Blink
Off
On
2. Test
Blink
Off
On
3. Wireless
Off
On (amber)
4. Internet
On (green)
Blink (green)
1-6
4
2
3
Description
Power is supplied.
Firmware is corrupt; the router is in rescue mode running TFTP server.
Users can use TFTP client to upload a valid version of the firmware.
Power is not supplied to the router.
The unit is performing the power on self test diagnostic.
The unit is performing a firmware upgrade or restoring the factory
defaults.
The unit successfully completed the power on self test diagnostic.
The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
The ethernet cable is connected but the router has not received an
Internet address.
The router has received an Internet address.
Data is being transmitted or received by the Internet port.
v1.0, July 2007
5
Introduction