NETGEAR WGR614v8 Reference Manual page 31

Figure 2-7
2. Enter a Name (SSID) in the field provided with a value of up to 32 alphanumeric characters.
The same Name (SSID) must be assigned to all wireless devices in your network. The default
SSID is NETGEAR, but NETGEAR strongly recommends that you change your network's
Name (SSID) to a different value. This value is also case-sensitive. For example, NETGEAR
is not the same as NETGEAR.
• Select your region from the Region drop-down menu. This field displays the region of
operation for which the wireless interface is intended. It may not be legal to operate the router
in a region other than the region shown here. If your country or region is not listed, please
check with your local government agency or check our web site for more information on
which channels to use.
3. Select a channel from the Channel drop-down menu (Auto is the default). This field
determines which operating frequency will be used. It should not be necessary to change the
wireless channel unless you notice interference problems with another nearby access point.
4. Select the desired wireless mode from the Mode drop-down menu.The options are:
– b and g: Both 802.11g and 802.11b wireless stations can be used.
– g only: Only 802.11g wireless stations can be used.
Internet and Wireless Settings
54 Mbps Wireless Router WGR614v8 Reference Manual
v1.0, July 2007
2-9