Washing Sequence - Haier HWM130-0713S User Manual

Washing sequence

Wash timer
Inlet selector
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
15
12
WASH SPIN
9
WASH TIMER
Wash
1 Inlet selector
(1)
Set fill selection to
(2 )
Adjust water level rod to a position as needed.
2
Fill water and add solved powder detergent until
water reaches a suitable level.
It begin to wash to dispense detergent uniformly.
3
Put in the wash load, and supplement water
as necessary.
4
Select the current
Select the strength of the current according to
the laundries. (Figure 3)
5 Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6 After washing,set the
at DRAIN .(Figure 5)
Wash selector
Drain selector Drain selector
(Do not set drain selector
(Standard current,
on Drain position during
strong current)
washing)
3
6
WASH SELECTOR
(
Wash side . Figure 1
( )
Figure 2
DRAIN SELECTOR
DRAIN SELECTOR
8
Spin timer Spin timer
(To set to below 1 minute, (To set to below 1 minute,
first set to 2 minute then first set to 2 minute then
turn it back. it can increase turn it back. it can increase
the service life of the timer). the service life of the timer).
5 5
DRAIN DRAIN DRAIN DRAIN
4 4
3 3
SPIN TIMER SPIN TIMER
DRAIN SELECTOR DRAIN SELECTOR
WASH SPIN
)
Figure 1
Figure 2
STRONG
STANDARD
Figure 3
WASH SELECTOR
OFF
3
15
12 6
WASH TIMER
9
Figure 4
OFF
DRAIN
Figure 5
1 1
2 2