Haier HWM130-0713S User Manual page 7

Haier twin-tub washing machine user's manual
Hide thumbs Also See for HWM130-0713S:
Table of Contents

Advertisement

Install the lint filter
Put the underside of the lint filter into overflow filter
then push the upside into overflow filter.
After installation, please refer that the lint filter
installed to the right station, otherwise the lint
filter may be fallen off when washing, influencing
your use.
How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the
side of the spin tub in the order of (1)~(3), heading
for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Install the water inlet hose; Select the water level
Insert the water inlet hose into the water-filling
entrance on the control pane directly.(pull it
out to dismantle it)
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Soft item
Soft item
Extend to the
spin tub side
Water inlet hose
Water inlet
5
overflow filter
lint filter
Back
Front
Figure 1
Figure 2
Embed into the
groove in turn
Figure 3
Water level
indicator
Max
Maximum
Med
Medium
Min
Minimum

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents