Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing Put in the laundries Usage of detergent Usage of the Operation Buttons Close the top lid Finish washing After washing Trouble shooting answer to question Packing list the back cover Specification the back cover...
Names of the parts Ä Ú ² ¿ ¹ ¹ Ô ì º Í ² ¿ ¼ þ Ã û ³ Æ Top lid component Detergent box Water absorption Liquid detergent inlet Outer tub cover Screw cover Control pannel Water inlet valve Hook Power cord Handle...
Safety precautions Do not decompose, repair or alter the machine Do not stretch hands into the working machine. by yourself. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items (such as the kettle Do not wash laundries with volatile materials with hot water) on the washing machine (such as thinner, petrol etc.).
Page 5
Safety precautions Please plug the power plug on special receptacle. The washing machine must be positioned so that Be sure to use three-pins power receptacle. Ensure the plug is accessible. Be sure to pull the plug off that the earthing prong of the power receptacle is and close the water faucet in following cases: earthed reliably.
Installation and adjustment Install the bottom plate After opening the package, please lean the washing machine gently down on soft Back items(like to welcloth,blanket,etc.).Install the bottom plate to the bottom of the machine with eight screws by across Front screwdriver, then lift the machine up Soft items gently.
Page 7
1.Lean the machine down gently with the front 3.Extend the drain hose from the left side. Push the surface facing the ground. drain hose into the groove with hands. Back Front Soft item 2.Pull out the drain hose from the groove at the left side. Use groove at this side after 4.Install the bottom plate (as per indicated before),...
Page 8
Confirm the water faucet water faucet, suitable water faucet, not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider.
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens nut of the water inlet hose please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.
Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition . that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 13.0kg.
Usage of the Operation Buttons Explanation of Buttons TIMES REMAIN (MINUTES) DELAY END(HOURS) REFILL DELAY AIR DRY SOAK WASH RINSE SPIN CHILD LOCK Indicator mode and meaning Flashing, indicating the running program On, indicating the program about to run or the selection mode Child lock function The function is intended for children safety and preventing the washing program from accidental changes by children.
Page 14
"WASH " button Press the Wash button to select a wash procedure. Press the button to select the desired WASH wash time from the MEMORY, HEAVY,ECONOMY,STANDARD,programs. The button is unavailable from the SPEEDY and TUB DRY programs. J "SOAK " button For the MEMORY,HEAVY,ECONOMY,STANDARD programs push the“SOAK”...
Operating procedure 1.Push the POWER button to switch on the power. 2.Push the PROGRAM button to select the suitable automatic program. After switching on the power, the machine will set to standard program auto matically. To select other program, push the PROGRAM button till the corresponding indicator is on.
Page 16
4.Push the WATER LEVEL button to selection suitable water level For program, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically. To select other water level, first push the "START/HOLD" button, then push the "WATER LEVEL"...
Close the lid Excluding during filling water procerdure,If you open the top lid, the machine will stop working and alarm before spinning. Finish washing When the washing is finished, the power will be switched off automatically.
After washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. Clean the detergent box and set it on It must be cleaned in time after each using.
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.