Download Print this page

Whirlpool RBD245PRQ04 Installation Instructions Manual page 8

24"(61cm) electric single and double built-in oven
Hide thumbs Also See for RBD245PRQ04:

Advertisement

Available languages

Available languages

8. Push each trimpiece intoplace atbottom oftrim.
A. Push trim into place and replace screw.
9. Use screws to attach each trim piece to oven.
10. Replace oven racks.
11. Replace oven door by inserting ends of hinges into hinge slots
in the oven frame.
12. Push hinges in as far as they will go and open the oven door.
You should feel the oven door drop into place.
13. Rotate both hinge latches back to the locked position.
14. Close and open the oven door to check that the door closes
and opens completely.
If the oven door does not close or
open completely, repeat the oven door removal process and
reinstall. See "Remove Oven Trim" section.
15. Repeat for lower oven door.
16. Reconnect power.
1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven cleaning, read the "Oven Care" section of the Use
and Care Guide.
5. Read "Oven Use" in the oven Use and Care Guide.
Check Operation
of Single Oven
1. Turn power on. "PF" should appear in the display.
2. Press CUSTOM BROIL. "BROIL" will appear in the display.
3. Press START. Make sure the oven door is closed and the "ON"
light is shown in the display.
If oven(s} does not operate,
check the following:
Household fuse is intact and tight; or circuit breaker has
not tripped.
Electrical supply is connected.
See "Troubleshooting"
section in the Use and Care Guide.
4. When oven has been on for 2 minutes, feel for heat.
If you do not feel heat or if an "F" followed by a number
appears in the display, turn off the oven and contact a
qualified technician.
5. Press OFF/CANCEL
Check
Operation
of Double Oven
1. Turn power on. "PF" should appear in the display.
2. Press UPPER OVEN or LOWER OVEN, to select the oven you
are testing.
3. Repeat "Check Operation of Single Oven" steps 2-5.
For the clock setting and other oven functions refer to the Use and
Care Guide.
If you need Assistance
or Service:
Please reference the "Assistance or Service" section of the Use
and Care Guide or contact the dealer from whom you purchased
your built-in oven.

Advertisement

loading