Advertisement
Available languages
Available languages
3=
Grasp the edges of the oven door with both hands and close
the oven door until it will no longer close. Lift and pull oven
door toward you and remove. Set the oven door aside on a
protective surface.
4. Remove bottom screw on each side of the oven trim.
5=
6.
A. Remove trim screw and pull ouL
Grasp the bottom end of trim and pull away from oven.
Slide top end of trim downward to remove trim from oven. Set
trim aside.
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply
wire and a cabinet-connected
bare ground wire crimped together.
f.
Disconnect power.
2. Feed the flexible cable conduit from the oven through the
opening in the cabinet.
3. Remove junction box cover if it is present.
4. Connect the flexible cable conduit from the oven to the
junction box using a UL listed or CSA approved conduit
connector.
5. Tighten screws on conduit connector.
6. Complete installation following instructions for your type of
electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
Electrical
Connection
Options
If your home has:
And you will be
Go to section:
connecting to:
4-wire direct
A fused
4-wire Cable from
disconnect or
Power Supply
circuit breaker
box
(12.7
cm)
3-wire direct
A fused
3-wire Cable from
disconnect or
Power Supply
circuit breaker
box
Advertisement
