Installation And Adjustment - Haier XQB42-62 User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
1.Press downward to
assmble.
2.Pull upward to detach.
Adjust the installation position
The washing machine shall be more than 20mm away from the wall.The largest
allowed slope of the shank base of the machine is 2 . The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable foot:
1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen
the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
Install the bottom plate
After you open the package,
please lean the washing
machine gently down on soft
items ( like the towel cloth,
blanket, etc. ). Install the
bottom plate to the bottom of
the machine with the eight
screws by a cross screwdriver,
then lift the machine up gently.
See to the figure:
Loosen
High
Before Using
Before Using
Screw
adjustable nut
Fasten
adjustable foot
Low
Back
Front
Soft items
Bottom plate