Table of Contents
Advertisement
Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena
are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real
breakdowns, please come to the special maintenance department or after-sale service department
of our company. Do not repair it by yourself.
Phenomenan
In spinning, the machine stops
running. (The "wash" "rinse"
"spin" indicator flash quickly)
The draining does not work,
or the speed of draining is
too slow ( the indicators of
"rinse" "spin" flash)
The safety switch acts. The
spinning can not work (the
indicators of "wash" "rinse"
flash quickly)
The program pauses after
about 8 minutes of water
inlet (the indicators of "wash"
"spin" flash quickly)
The machine does not act.
There's abnormal sound
inside the machine.
The water faucet leaks.
Common phenomena
Phenomena
The spinning is intermittent when it starts.
Push the "Process selector" button to
select "Spin", but it doesn't work.
There may be some water flowing out of
the drain hose in the first use of the machine.
In the final spinning, it stops and displays
"Rinse", and starts water inlet.
The reason
The top lid is not closed.
Is the drain hose put down?
Is the drain hose blocked
by foreign material?
Are the laundries put
slantingly?
Is the machine slanting?
The water faucet is not open.
The water inlet valve is
blocked.
The water pressure is too low
and the current is too small.
Is there power failure?
Is the power plug loose?
Is the machine slanting?
Are the laundries slanting
in spinning?
Is the jointer screw of the
water inlet hose is loose
or twisted awry?
Balance the laundries to avoid slanting.
The program is setting the drain time. Some
time is needed before it starts spinning.
It is the water remained in the factory
inspection of performance.
It is because that the laundries are slanting
to one side, and the safety switch acts. After
water inlet and stirring, the slanting will be
removed and the spinning will work.
How to settle
Close the top lid.
Put down the drain hose.
Open and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Re-order the laundries.
Close the top lid.
Level the machine in right position.
Open and close the top lid once.
Open the water faucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.
Explanation
Advertisement
Table of Contents
