•
Hill launch assist
•
Ignition
•
Low fuel level
•
Oil pressure
•
Service interval
•
Shift
•
Stability control (ESP) and traction
control
•
Water-in-fuel
High series instrument cluster
The following warning lamps and
indicators will come on briefly when you
switch the ignition on to confirm that the
system is operational:
•
ABS
•
Airbag
•
Brake pad wear
•
Brake system
•
Cruise control
•
Engine
•
Hill launch assist
•
Ignition
•
Low fuel level
•
Message indicator
•
Shift
•
Stability control (ESP) and traction
control
•
Water-in-fuel
If a warning or indicator lamp does not
illuminate when the ignition is switched
on, this indicates a malfunction. Have the
system checked by properly trained
technician.
Instruments
ABS warning lamp
properly trained technician. You will
continue to have normal braking (without
ABS) but have this checked as soon as
possible.
Airbag warning lamp
properly trained technician.
Brake pad wear warning lamp
checked by a properly trained technician
as soon as possible.
Brake system warning lamp
Reduce your speed gradually. Use
your brakes with great care. Do not
step on the brake pedal abruptly.
circuits. Check the brake fluid level. See
Brake and clutch fluid check (page
130).
Have this checked immediately.
50
If it illuminates when driving, this
indicates a malfunction. Have
the system checked by a
If it illuminates while driving, this
indicates a malfunction. Have
the system checked by a
It will illuminate when the brake
pads have worn down to a
predetermined limit. Have this
WARNING
If it illuminates when you are
driving, this indicates a
malfunction in one of the brake
WARNING