Ford Transit Owner's Handbook Manual page 152

WARNINGS
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave the
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Make sure that the arrows on
directional tyres point in the direction
of rotation when the vehicle is
moving forwards. If a spare wheel has to
be fitted with the arrows pointing in the
opposite direction of rotation, have the
tyre refitted in the correct direction by a
properly trained technician.
Do not work underneath the vehicle
when it is supported only by a jack.
Note: Make sure that the jack is vertical
to the jacking point and the base is flat on
the ground.
E70956
• Remove the hub cover.
• Remove the nut caps.
• Slacken the wheel nuts.
Wheels and tyres
E70960
•
•
Fitting a wheel
wheel studs and nuts.
Note: The wheel nuts of alloy wheels can
also be used for the steel spare wheel.
•
•
150
Jack up the vehicle until the tyre is
clear of the ground.
Unscrew and remove the wheel nuts
and take off the wheel.
WARNING
Make sure that there is no
lubrication (grease or oil) on the
threads or the interface between
Align and fit the wheel onto the wheel
studs. Make sure that the flat washers
of the wheel nuts are facing the wheel.
Screw on the wheel nuts and tighten.
Lower the vehicle and remove the
jack.