Haier HWM90-98 User Manual page 15

After switching on the power, the washing machine will set to common program including"wash, rinse,
spin "automatically.To select other procedures, push the "SOAK"," WASH"," RINSE"or "SPIN/DISINFECT"
button to select the time of soak,wash and spin, and the times of rinse. After switching on the power,
if you push one of the button among "WASH", "RINSE"and" SPIN/DISINFECT ", the digitron of the former
procedures will turn off automatically. The former procedures will not run. For instance: after switching
on the power. If you push the "SPIN" button first, it will execute spin singly after starting.
Attention
.
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to water level 3.
After the machine starts operation, you can only set the program and procedure during washing, and can not
make setting in other cases.
The soak program can be used as fitting of common, carpeting,nomarl or cotton automatic programs. It will do soaking
with intermittent stirring of pulsator.
When you select to disinfect clothes. You select to use softener too. If you don't select to disinfect,please put don't in softener.
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.
After defection, it can set the water level automatically. To select other water level, first push the "START/PAUSE"
button, then push the "WATER LEVEL" button to set the water level. Refer to "water level, water quantity and
desoge of powder"in Page 9 and "WATER LEVEL"button in Page 11 for selection.
Page 9
Water Level and Time Table for Each Program (self programming not included)
Water
Program
level
Common 1~10
Save 1~10
Posthaste 3
Carpeting 1~10
Normal 1~10
1~10
Cotton
1~10
Woollen
1~10
Silk
Page 11
Wash(minutes) Rinse(minutes)
About 9-11
Rinse twice, about 3 each time
Saving water program, total about 10 minutes
About
About 2 Saving water program, total about 4 minutes
About 20
Rinse twice, about 5 each time
About 10-14 Saving water program, total about 13 minutes
About 10 Rinse three times, about 3 each time
About 3
Rinse twice, about 2 each time
About 5 Rinse twice, about 2 each time
Using process Using process
WATER LEVEL
Total time(minutes)
Spin(minutes)
About 5
About 34-36
About 7
About 25-29
About 5
About 3
About 4
About 20
About 6
About 54
About 48
About 25
About 30
13