Tpms Reset Sequence - Ford 2008 F-150 Owner's Manual

Ford f-150
Hide thumbs Also See for 2008 F-150:
Table of Contents

Advertisement

Tires, Wheels and Loading
If reset mode has been entered successfully, the horn will sound once,
the TPMS indicator will flash and the message center will display TRAIN
LF TIRE.
If after repeated attempts to enter reset mode, the horn does not sound,
the TPMS indicator does not flash and the message center does not
display TRAIN LF TIRE, seek service from your authorized dealer.

TPMS reset sequence

The TPMS system needs to be reset starting with the left front tire in
the following clockwise order:
1. Left front tire
2. Right front tire
3. Right rear tire
4. Left rear tire
1. Left front tire: Place the TPMS reset tool against the left front tire
where the tire meets the rim, opposite from the valve stem (1) as shown.
This is where the sensor is located inside the rim.
The tool needs to be held against the tire sidewall opposite the
valve stem as illustrated with the arrow on the tool pointing
towards the rim; do not use the tool with the arrow pointing away
from the rim as it may not activate the sensor.
2. Press and release the green button and hold the tool to the tire
sidewall until the horn sounds. The red light on the TPMS reset tool will
233
2008 F-150
Owners Guide (post-2002-fmt)
USA

Advertisement

Table of Contents
loading

Table of Contents