Rear View Camera; Enable Valet Mode - Ford 2014 EXPLORER Owner's Manual

Ford explorer

Hide thumbs Also See for 2014 EXPLORER:

Table of Contents

MyFord Touch® (If Equipped)

Rear View Camera

This menu allows you to access settings for your rear view camera.

Press the Settings icon > Vehicle > Rear View Camera, then select

from the following settings:

• Rear Camera Delay

• Visual Park Aid Alert

• Guidelines.

Note: If the system locks, and you need to reset the PIN, enter 3681 and

the system unlocks.

Valet mode allows you to lock the system. No information is accessible

until the system is unlocked with the correct PIN.

1. Press the Settings icon > Vehicle > Enable Valet Mode.

2. When prompted, enter a four-digit PIN.

After you press Continue, the system locks until you enter the PIN again.

Access and adjust system settings, voice features, as well as phone,

navigation and wireless settings.

Press the Settings icon > Settings > System, then select from

the following:

System Prompt

Touch Screen Button

Touch Panel Button

2014 Explorer (exp)

Owners Guide gf, 1st Printing, April 2013

Select to have the touchscreen display in

English, Spanish or French.

Select to display units in kilometers or miles.

Select to display units in Celsius or

Adjust the volume of voice prompts from the

Select to have the system beep to confirm

choices made through the touchscreen.

Select to have the system beep to confirm

button choices made through the climate or

audio system.