Table of Contents
Advertisement
170
4. To return the seat back to the floor from the
tumbled position, rotate the seat down until you hear
it latching to the floor.
Note: The seatback will not raise if the rear latch hooks are not properly
engaged to the floor striker. If the seatback does not raise, then repeat
Step 4.
6. Pull the head restraint back up to its normal adjusted position.
2014 Explorer (exp)
Owners Guide gf, 1st Printing, April 2013
USA (fus)
Seats
5. Lift the seatback toward the rear
of the vehicle, and rotate the
seatback until you hear a click,
locking it in the upright position.
Make sure that the rear latch hooks
are properly engaged with the floor
striker.
Note: Make sure that the seat and
seatback are latched securely in
position. Keep floor area free of
objects that would prevent proper
seat engagement.
Advertisement
Table of Contents
Troubleshooting
